What is CC in motorcycle racing? In a nutshell, it means a carbon monoxide sensor is installed on the bike and its exhaust system is regularly checked for leaks. This sensor detects the amount of the gas in the air before it is released into the environment and this is one way of keeping pollution in check.
The problem arises when carbon monoxide, which is an odorless, colorless, tasteless gas, enters the body of a motorcyclist through inhalation and gets into the blood stream. It can cause various problems for the victim such as dizziness, unconsciousness, coma, and death.
In addition to its lethal effects, carbon monoxide poisoning also affects those who are very tired and have little energy. This condition usually happens after prolonged exposure to the gas. A motorbike racer can take precautionary measures in case of this situation by installing an automatic check on the gas and exhaust system.
Carbons in motorcycle racing can be detected by using carbon monoxide detectors. The detector senses the presence of carbon monoxide through the use of an electrode. There is also a small and clear glass tube with a tip that is inserted into the exhaust pipe.
If you are a motorcyclist who uses a bike for traveling purposes or who uses a motorbike for pleasure in a public place, you need to make sure you regularly check the gas and exhaust system and use an automatic carbon monoxide detector while riding. This is one preventive measure to ensure your safety. You can also have the detector mounted on the helmet so you will know that it is switched on when you are riding.
A detector does not only come in handy for bikers, but for truck drivers too. These detectors can alert you to carbon monoxide leaks in the exhaust system, especially if you’re driving an old vehicle or a pickup truck that can leak gas. Even though this might not seem important, having a detector is safer than not having one since there is no danger of inhaling the gas without knowing it.
With a detector, you can determine where the leak is coming from. For example, if the leak is coming from a fuel tank under your bike, the detector will tell you to pull over the vehicle and turn it off. Although this is difficult to do for many bikers who are used to riding, a fuel tank under the bike is more prone to leaking because there is little air in it. and the gas can get accumulated in the tank.
You can also check whether the sensor is working properly. You can always check it at night when it’s not being used and you will notice that the sensor is not flashing when you crank on the bike or when you turn the ignition.
It is also important to check the safety guard around the sensor. The safety guard is made of plastic so it should not break easily but you should make sure that the safety guard is properly attached to the sensor so that if the motorbike starts moving, the guard should not fall off because it will make the sensor ineffective.
Although the safety guard around a carbon monoxide detector is very important, you should not neglect it as a matter of fact. The safety guard needs to be maintained properly so that the sensor won’t break off.
When you are riding, ensure that you have the detector turned on. at all times so that you will not miss the detector.
When you are riding, you should never ride without the detector on your motorcycle. because you will never know when you are going to be in an area that the gas tank is low.